Projexeuromotive

Racingline Lower Motor Mount Twin Dogbone Inserts MQB

Name: Racingline Lower Motor Mount Twin Dogbone Inserts MQB
Brand: Projexeuromotive
Price: 250.0 NZD
Availability: InStock

$250.00 NZD

Sale Sold out

Shipping calculated at checkout.

Variation V1 (VWR150003) V2 (VWR150004)

Product variants

Quantity

Get your power to the road or track where you need it!

The Twin Dogbone Inserts fill the large voids in the factory lower engine mount with two billet inserts, limiting drivetrain movement for greatly improved strength and a much more enjoyable drive.

The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.

By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.

Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).

The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts.

All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages.

The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages.

Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.

Twin Inserts.
Working together.

Upper Insert: slides into the voids along the rear side of mount.

Motor Mount Twin Dogbone Inserts, MQB/MQB Evo models.

Lower Insert: inserts into the voids from underneath.

Confirmed Applications.

MQB & MQB 'evo'

2.0 TSI, 1.8 TSI, 2.5 TFSI, 2.0 TDI MODELS

VWR150003/4 see below to identify which type

>	VW Golf 8	2020+
>	VW Golf 7 & 7.5	2013-2020
>	VW Passat B8	2015+
>	VW Arteon	2017+
>	VW T-Roc	2017+
>	VW Tiguan II	2016+
>	VW Jetta / GLI 7	2018+

>	Audi S3 8Y	2020+
>	Audi A3 8Y	2020+
>	Audi S3 8V	2013-2020
>	Audi A3 8V	2013-2020
>	Audi RS3 2.5 TFSI 8Y	2021+
>	Audi RS3 2.5 TFSI 8V.2 evo	2017-2020
>	Audi RS3 2.5 TFSI 8V	2015-2017
>	Audi TT 3 8S	2014+
>	Audi TTRS 2.5 TFSI 8S	2017+
>	Audi SQ2	2018+
>	Audi RSQ3 F3	2019+

>	Cupra Leon IV FW	2020+
>	SEAT Leon III Cupra 5F	2014-2020
>	Cupra Ateca	2018+
>	Cupra Formentor VZ5 2.5 TFSI	2020+
>	Cupra Formentor	2020+

>	Skoda Octavia IV NX	2020+
>	Skoda Octavia III 5E	2014-2020
>	Skoda Superb III 3V	2015+
>	Skoda Kodiaq vRS	2018+

Select your
correct version.

The factory mount comes in two version across MQB models. To ensure fitment on your vehicle, please visually verify the mount you have, then select the correct insert below: